Product Description
FPV Drone Kit 15-Inch carbon fiber Payload 7.5kg thermal imaging racing drones
This 15-inch FPV kamikaze drone features a high-performance carbon frame and a powerful 4214 380KV motor. With a payload capacity of 7.5kg, it offers 8-15 minutes of flight time with load and up to 25 minutes without load. It boasts a 10km range, 120km/h max speed, and 5000m altitude. It's designed for serious aerial tasks and has a 16000mAh battery, F722 flight controller, and 5.8GHz video transmission. The drone supports a wide range of accessories, including a 1500TVL camera, 80A ESC, and durable HQProp 15x7x3 blades
Product Parameters
| ZAi-PS15 Product Specification 15-inch fpv kamikaze drone |
| 15-inch Carbon Frame | Motor 4214 380KV |
| Attribute | Value | Attribute | Value |
| Frame Dimension | L52*W52*H25 cm | Operating Rated Voltage | 6-8S |
| Wheelbase | 70cm | Motor Weight | 246g |
| Carbon Plate Material | T300/T700 | Maximum Thrust | 4850g |
| Camera Spacing | 2cm | Maximum Power | 1760 W |
| Stack Mounting Hole | M3*30.5mm | Maximum Current | 60A |
| VTX Mounting Hole | M2*20/25.5mm M3*30.5mm | Phase Resistance | 48mΩ |
| Flight Control F722 | ESC 80A 8S |
| Attribute | Value | Attribute | Value |
| BEC | 5V2A ,9V2A | Input Voltage | 8S |
| Input Voltage | 12-50V(3-6S Lipo Recommended) | Continuous Current | 80A |
| Firmware | Betaflight | Mounting Hole Spacing | 30.5*30.5mm |
| Mounting Hole Spacing | 30.5mm/M3 | Weight | 28g |
| Camera 1500TVL | VTX 5.8G 40CH 2.5W |
| Image Sensor | 1 / 3′CMOS | Supported Voltage | 7-28V |
| lens | 2.1mm | Antenna Interface | MMCX |
| Power Supply | DC 5V-30V | Mounting Holes | 20X20.M2 |
| Pixels | 1500 TVL | Output Power | PIT / 25 / 2500mW |
Antenna | 5.8G RHCP 150MM |
| RX | ELRS 915MHz |
| propeller | HQProp 15*7*3 |
Product Advantages - Carbon Fiber Frame: high-strength carbon fiber to reduce weight and improve body stability, allowing it to work in a variety of environments
- Large payload up to 7.5kg
- High-Precision And Extremely Fast Flight: super strong power and strong fuselage, with 10inch blade, flight speed up to 30 m/s, built-in M10 high precision GPS chip, and accurate positioning, so that it is both fast and accurate
- Antenna 5.8G RHCP 150mm: It is made of imported PC+ABS material which can withstand high-strength impact, Impact-resistant double-sheathed semi-rigid cable, Root reinforcement design, and 360 ° protection.
Product Application
flying enthusiasts, aerial photographers, projects, Israel military, army, DJI dealers, distributors, remote control companies, RC car companies, sports camera dealers, 3-axis hand-held gimbal agents, consumer electronics companies, supermarkets, online offline stores, physical shops, etc.
